BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: babell2 on April 12, 2011, 07:51:25 AM
Looking for a been there done that answer.
Do you, re bush, Rebuild, or (least prefered) replace?
Both arms on my MCI-9 are worn. See picture
Thanks in advance
Brice
Brice -
For the amount of time/effort required to rebush/rebuild, it's far easier just to replace. Especially since these are a SAFETY item!
Wiper arms are not that expensive compared to other bus parts.
Anco & Trico make them - you should be able to pick up a pair at your local NAPA store, altho your store may have to have them brought over from their local distribution center.
Or call Luke: 1-888-262-2434 between 9-5 Eastern.
FWIW & HTH. . .
;)
Thanks RJ
I have disassembled both of them and believe I can use all the parts to rebuild one serviceable arm. I guess this one will go on the Passenger side and a new arm and blade with blade holder will go on the Drivers side.
Brice
haha!! Windshield wiper problems? Where I live it very rarely rains and just isnt something I think of until it is too late! I found out on my last long trip, about 1000 miles from home, that my windshield wipers did not work right! I had never thought to test them out! But I did find that I had a nice on board set of wipers ;D ;D ;D
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi495.photobucket.com%2Falbums%2Frr315%2Fhappycamperbrat%2Fvacation%25202010%2Fvacation2010058.jpg&hash=d2e9a798c4dc28f0505c60986be3b174f2275d7b)
rainex helps :D
Rainex is great! I found that out on that trip too lol