Print Page - Injector heigth

Title: Injector heigth
Post by: chart1 on March 16, 2011, 04:54:54 PM

Can someone tell me what the injector heigth should be on 8v71n in coach for n65 injector I keep finding differnt numbers I came up with .484 and .500 any idea which one. (Cliff I am kind of addressing this to you)LOL

Title: Re: Injector heigth
Post by: bevans6 on March 16, 2011, 06:45:25 PM

white tag or brown? advanced or standard timing? white/standard - 1.460". Brown/advanced - 1.484" But I'm not Clifford and all I have is a factory manual...

Brian

Title: Re: Injector heigth
Post by: chart1 on March 16, 2011, 07:05:10 PM

Thanks they are brown tag .484 is what i found to but I laso found where it said .500 for coach.

Title: Re: Injector heigth
Post by: luvrbus on March 16, 2011, 07:35:44 PM

Cory, either will work the 1.500 will give a little less smoke and you will lose a few hp but not enough to worry about

good luck

Title: Re: Injector heigth
Post by: chart1 on March 16, 2011, 07:47:52 PM

Thanks guys I set them at 1.500

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: chart1 on March 16, 2011, 04:54:54 PM