Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Barn Owl on February 19, 2011, 04:19:15 PM

Title: Upgrading GM to DDEC & V731, or taking a DDEC to a MUI. What is involved?
Post by: Barn Owl on February 19, 2011, 04:19:15 PM
Questions:

1. How hard is it to put a DDEC in a 4106?

2. How difficult/expensive to convert a DDEC to a MUI.

3. Advantages/Disadvantages either way?

4. Same questions with the V731.

5. Can you mix the two?
Title: Re: Upgrading GM to DDEC & V731, or taking a DDEC to a MUI. What is involved?
Post by: buswarrior on February 19, 2011, 06:44:10 PM
Go find Bill Gerrie over at BNO.

He's done just about every mix and then some.

happy coaching!
buswarrior
Title: Re: Upgrading GM to DDEC & V731, or taking a DDEC to a MUI. What is involved?
Post by: Barn Owl on February 19, 2011, 06:59:09 PM
Yes, I should have posted on both, excellent suggestion.

Thanks
Title: Re: Upgrading GM to DDEC & V731, or taking a DDEC to a MUI. What is involved?
Post by: TomC on February 19, 2011, 09:35:05 PM
Personally, I like everything to be mechanical.  All the advantages of electronics and the additional fuel mileage will quickly go away when (not if) the electronics fail and you have to have the bus towed and analyzed.  Good Luck, TomC
Text only | Text with Images