Print Page - MCI 9 side window needed.

Title: MCI 9 side window needed.
Post by: ojgetaway32 on January 20, 2011, 07:51:22 AM

Happy New Year All!

So some no-good degenerate punk vandalized my Niner by smashing a side window out. I would like to just keep it simple and do a OEM replacement, frame and all if feasible. Any info on solutions to this minor challenge would be appreciated. Spring hockey tourneys are starting soon so we need to have it ready to roll!

Go 8V71!

Go Steelers! Go Penguins!

Josh

Title: Re: MCI 9 side window needed.
Post by: Hi yo silver on January 20, 2011, 10:00:54 AM

Josh,
Try a local charter company. They might have a 9 they're parting out. You have to measure carefully. I think the later nines might have taller windows. Maybe one of the guys here can jump in here. All I know is that when I bought my '82 MC9, there was an issue with one window, and the first glass the seller replaced it with was too small and didn't quite fit into the rubber gasket. Finally, he had to replace frame and all. He had two other MCIs and was robbing from the other busses. Good luck.
Dennis

Title: Re: MCI 9 side window needed.
Post by: Busted Knuckle on January 20, 2011, 10:23:06 AM

I don't know about a size difference on the 9's. (I ain't say'n there ain't, just that I'm unaware of it.)
I do know that the 9 & the 96A/102A, B, C, & D's are different.
I also know that Mr. Bowen down @ Choo-Choo garage should have what ya need either upstairs, in a stock pile or still in a bus! Give him a call or shoot Mike Sullivan (HighTechRedneck) a PM and ask if he can check with Mr. Bowen.

Also Sam Caylor @ Caylor's Supply - Rantoul, KS will definitely have it also!
;D BK ;D

Title: Re: MCI 9 side window needed.
Post by: bowmaga on January 20, 2011, 01:29:13 PM

I still have all of mine that we removed from our 9, in order to skin it and install sliding windows. Where are you located? I'm in northwest ohio. I'd give them to you.
Greg

Title: Re: MCI 9 side window needed.
Post by: Highway Yacht on January 20, 2011, 03:19:26 PM

Quote from: bowmaga on January 20, 2011, 01:29:13 PM
I still have all of mine that we removed from our 9, in order to skin it and install sliding windows. Where are you located? I'm in northwest ohio. I'd give them to you.
Greg

Now this is a deal that would be hard to beat.. Josh would most likely have to pay shipping no matter where they are located unless he can find them locally ..

Title: Re: MCI 9 side window needed.
Post by: ojgetaway32 on January 21, 2011, 08:08:01 AM

Greg:

I am in Wheeling, WV. I will drive there to get them. I have an 1983 MC-9. Do you think they will work? Thanks so much!

Josh

Title: Re: MCI 9 side window needed.
Post by: travelingfools on January 21, 2011, 06:18:09 PM

Ive got one you can have in Western NY if Im closer...

Title: Re: MCI 9 side window needed.
Post by: ojgetaway32 on January 24, 2011, 06:56:38 AM

Thanks you Traveling Fool! However, I would like to have Greg's multiples.

Greg, please contact me at ojgetaway32 at america online.

Thanks,

Josh

Title: Re: MCI 9 side window needed.
Post by: ake1994 on January 24, 2011, 10:02:17 AM

I too have a full set out of an 87 MC9 in Lynchburg VA. If that would help you.

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: ojgetaway32 on January 20, 2011, 07:51:22 AM