Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: scoobydo42 on September 04, 2006, 04:32:57 PM

Title: steering column installation - MCI 5B - Wiring diagram or advice requested!
Post by: scoobydo42 on September 04, 2006, 04:32:57 PM
I purchased a freightliner tilt steering column from Bart Grabhorn a couple of years ago and now am putting it in. Does anyone have a wiring diagram on how this steering column is wired. Its p/n is 14-13340-0 . It has about twelve wires. I think in time I can figure it out, but if someone has a diagram or has done it before, I would appreciate the help.
Thanks Marty Caverly
MCI5B
Title: Re: steering column
Post by: plyonsMC9 on September 05, 2006, 08:40:19 PM
Greetings Marty,

Good to have you on board with us! 

I've modified your subject heading - I know we've got some top flight MCI bus nuts who can probably offer some suggestions.

Please let us know how it goes.

Best Regards, Phil

Title: Re: steering column installation - MCI 5B - Wiring diagram or advice requested!
Post by: plyonsMC9 on September 06, 2006, 08:36:41 PM
Hi Marty,

Are you still looking for this?  Just in case, I'll give one more "bump".

Best Regards, Phil

Title: Re: steering column installation - MCI 5B - Wiring diagram or advice requested!
Post by: prevost82 on September 07, 2006, 08:30:36 AM
I would suggest that you go to nearest Freightliner and get a photo copy of the schematic. You'll need to know the year and model of truck that the steering columncame out of.
Ron
Text only | Text with Images