BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: bevans6 on December 02, 2010, 12:13:24 PM
Does anyone have a wiring diagram for the Ramco remote control switch? I have a switch, about 1" square, that has a joystick know that switches to two positions. I didn't know if it was to control two mirrors (left and right) or to control both flat and convex glass on one mirror.
Thanks, Brian
Hi Brian,
I guess the easiest way to figure it out is to call Matt at Ramco.
Ramco Technical Support:
Matt Reverman
574-266-1455 ext. 109
mreverman@ramco-eng.com
Good Luck
Nick-
Lets see if this works. Here is the schematic. If you cannot see it good enough, email me and I will send it to you. Each switch controls 1 mirrir. The center switch it to select flat or convex mirror. I installed a separate SPST switch for the heated mirror option. Jack
jack, that is exactly what I needed . And I would never have figured it out by trial and error.
Brian