Print Page - MCI Axle Type or # s

Title: MCI Axle Type or # s
Post by: NeoplanAN440 on December 01, 2010, 08:07:00 AM

Can Anyone on here tell me the rear drive axle numbers and type of bus !!!

looking to find out what bus has a pumpkin that fits to a Rockwell Axle with a Tag
59743WX19 NK8361995

thanks for any help!!

Title: Re: MCI Axle Type or # s
Post by: edroelle on December 01, 2010, 04:40:01 PM

I have had very good assistance from Rockwell Technical. I have 2 numbers for them

888-725-9355
800-535-5560

These ratios are rough as my memory is old. 8V71s and 6V92s received approximately 3.83 axles while 8V92s got approximately 3.34 ratio.

Ed Roelle
Flint, MI

Title: Re: MCI Axle Type or # s
Post by: NeoplanAN440 on December 03, 2010, 09:53:00 AM

Thanks for the Help so far!!!

i think i have to ask my questions different!!! :)

can anybody tell me the rockwell meritor # on the drive axle of a MCI 9 or 8 and the ratio ????

im trying to find out if a complete MCI pumkin will fit into my Axle housing without modifications!!!

thanks

Title: Re: MCI Axle Type or # s
Post by: Busted Knuckle on December 03, 2010, 05:27:20 PM

Quote from: NeoplanAN440 on December 03, 2010, 09:53:00 AM
Thanks for the Help so far!!!

i think i have to ask my questions different!!! :)

can anybody tell me the rockwell meritor # on the drive axle of a MCI 9 or 8 and the ratio ????

im trying to find out if a complete MCI pumkin will fit into my Axle housing without modifications!!!

thanks

I wish I could tell you. But I don't know and my MCI parts bus is 50 miles away. But if a pumpkin from a 102A3 will work I have one with 3.33 gears still in the housing and the axles to go with it!

One thing to be careful about when changing out used "pumpkins" from other models is the size & spline 3's off the axles! (don't ask me how I know this, but I will tell you it involves extra labor! We put a diff out of a 9 in a 102A3 once and the axles were to large and the ones out of the 9 were like 3" too short! Is yer bus a 96" or 102" wide?)
;D BK ;D

Title: Re: MCI Axle Type or # s
Post by: NeoplanAN440 on December 03, 2010, 06:35:47 PM

Now we are talking :)

my bus is 102" wide !!!!
i guess the 3.33 will be a little tall for a stock 6v92 with a ht 748 !!!

Title: Re: MCI Axle Type or # s
Post by: Busted Knuckle on December 03, 2010, 07:53:01 PM

Quote from: NeoplanAN440 on December 03, 2010, 06:35:47 PM
Now we are talking :)

my bus is 102" wide !!!!
i guess the 3.33 will be a little tall for a stock 6v92 with a ht 748 !!!

I don't see why. Ours is/was a 6V92 & ht 740.
If it will work for you I'd make you a deal on the pumpkin & axles and I'm sure we can find someone going West on I-40 to deliver it.
;D BK ;D

Title: Re: MCI Axle Type or # s
Post by: NeoplanAN440 on December 06, 2010, 08:11:31 AM

So far no luck with getting Axle numbers!!!!

Please note the Axle id , next time your bus is on a Pit for lube or brake service!!

thanks

looks like i have to look for a complete 102" axle to swap the whole unit!!

Title: Re: MCI Axle Type or # s
Post by: Busted Knuckle on December 06, 2010, 09:38:47 AM

Quote from: NeoplanAN440 on December 06, 2010, 08:11:31 AM
So far no luck with getting Axle numbers!!!!

Please note the Axle id , next time your bus is on a Pit for lube or brake service!!

thanks

looks like i have to look for a complete 102" axle to swap the whole unit!!

Hmmm, I even know where a complete axle is hub to hub! ;)
;D BK ;D

Title: Re: MCI Axle Type or # s
Post by: NeoplanAN440 on December 08, 2010, 07:15:11 AM

I maybe even have to go that way!!!!

still havent gotten any numbers yet!!

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: NeoplanAN440 on December 01, 2010, 08:07:00 AM