BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Bill in KS on November 26, 2010, 02:17:48 PM

Title: 4104 get'n scrapped , what all should I pull off ??
Post by: Bill in KS on November 26, 2010, 02:17:48 PM
Heading to the scrappers place in two or three days to cut a deal on the engine / trans / radiator and 3rd member before he scraps the bus.  I'll probably get the ID plate to hang in the shop.  Mechanical condition of everything is unknown. 

What other parts should I pull to have as spares or swap'n material ???   

I don't need anything for my bus but I can tolerate to have some things sitting around the farm if bought at scrap price. 

Bill in KS
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: uncle ned on November 26, 2010, 02:29:02 PM



Every thing that is removable,  sooner or later the group of 4104 owners will need it.I don't know of a owner that would sell their bus till they get to old to drive. Most of us end up with several just to keep them from getting them scraped.

If it was closer I would go with you and get the whole thing.

uncle ned
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: Bill in KS on November 26, 2010, 02:36:50 PM
Hey
I understand and agree. 

I've only had my bus for a few months and haven't felt the pinch of not being able to find " that part " so I thought I'd throw it out on the board for some ideas.

I have plenty of equipment to handle any of the parts off of the bus.

Bill in KS

Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: fe2_o3 on November 26, 2010, 03:37:42 PM
   Does it have an alt. or gen? Good voltage reg?(expensive when stuck out in the pucker brush). Are the brake drums, s cams good? Drive lines (yoke)? Exhaust manifold(s)? Clearance lights? (usually right side) Amber and red bullet lights. Rear or front glass?
   Just some of the things I've had to hunt down over the years. Once it's scraped they're gone...I understand, but still it's sad...Cable
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: Ed Hackenbruch on November 26, 2010, 05:02:07 PM
Bay doors?
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: uncle ned on November 26, 2010, 05:14:50 PM


If it has the original rear glass    pure gold



uncle ned
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: gmpd4104 on November 26, 2010, 06:43:25 PM
rear glass
marker lenses
any good bay doors ( can be taken apart later)
entry door
engine doors
radiator if good
Governor assembly
Bumpers if good

Really anything you feel lake taking off and storing if it is in good shape....
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: Rick59-4104 on November 26, 2010, 10:21:29 PM
 Bill,
If the second cargo door in front of the rear wheel well on the drivers side is in good condition I would be interested in buying it.......I also need and would buy the parking brake assembly that goes on the driveline just ahead of the transmission, someone removed mine I guess when they put spring brakes on but it would be nice to have....
My cell is eight-seven-zero-416-sixty-four twenty if you need to discuss the parts I am looking for....

Thanks
Rick
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: Bill in KS on November 27, 2010, 07:02:55 AM
Rick59-4104,

I'll call ya this afternoon

Bill in KS
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: divinerightstrip on November 27, 2010, 07:18:13 AM
gauges! cluster! radiator!

-DRT :)
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: sweeney153 on November 27, 2010, 10:23:28 AM
Bill
I am looking for the panels between the side windows.

Kevin
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: fe2_o3 on November 27, 2010, 12:41:15 PM
   Dude! You've got a goldmine there!...Cable
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: Rick59-4104 on November 27, 2010, 01:35:23 PM
Hello Bill,
Thanks for calling, I just double checked it is the second bay door in front of the rear wheel well, drivers side I need...The door in front of the battery compartment.

Thanks
Rick
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: zubzub on December 03, 2010, 06:16:16 AM
If it's not too late, the upper hinge post for front door, that is inside the body, held on by three bolts, blind removal with a socket wrench but doable.  also the steering wheel horn contact internals (lost mine)
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: bigjohnkub on December 03, 2010, 08:13:40 AM
Sounds like time for a tear-down rally at your place.  All with same model could come and help tear apart and pay their portion.

Big John
Title: Re: 4104 get'n scrapped , what all should I pull off ??
Post by: Bill in KS on December 03, 2010, 09:23:21 AM
Hey
I'll see what all I can get pulled while I'm there. 

Anyone else have parts needs ??

I'm planning on making one " trip to strip " due to the bus being aprox 65 miles one way from my place.

Looking like I better take a bigger trailer and the skid steer !!


Bill in KS