BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: silversport on November 14, 2010, 12:25:16 PM
Is there anyone out there who knows how to manually release the brakes of the mini-maxis when you have lost air? Have replaced the diaphragm and they work fine but if the emergency ever arises I would like to know how to release the brakes before crises.
Ok Iam going out to the Bus and take a picture of mine ,On the inside of mine there is a plastic cap held on with a small screw and it say s on the side to remove the cap and 9/16 wrench and tighten nut heres the picture.I hopw lol
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi427.photobucket.com%2Falbums%2Fpp351%2Fwrightwy%2FDSC05453.jpg&hash=5c72bef658573c69f22d678f7f8705382928b4b6)
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi427.photobucket.com%2Falbums%2Fpp351%2Fwrightwy%2FDSC05454.jpg&hash=59c1916276e8da9f87835ba785e17f1a1cc55cb2) This is the other side (Driver side )Hope this helps
Hope this help too.
As I understand it all spring brakes release in much the same way as shown.
If you really want to know exactly ask any tow truck driver!
Thank you, mine the label was gone.