BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: robertglines1 on November 09, 2010, 05:40:23 AM
Looking for siding source for the stainless steel ribbed bay doors for 98 XLE prevost..on one side I will be changing bay doors out to side swing to be able to open when slides are out. will not need handle cut out just straight pieces. Have a friend that was going to do but is getting cold feet so thought I would ck for source. My brake only goes to 48 inches or would try myself..Bob
Might try Caylor for used, or IBP for new!
;D BK ;D
Bob
Call Steve at IBP, International Bus Parts, 1-800-468-5287 or go to the website www.ibpindustries.com (http://www.ibpindustries.com). Steve has custom made several bay door covers for me when I installed basement airs in the evaporator and condenser bay on my 91 Prevost XL. They are ribbed like Prevost but have custom venting to match the basement units. Cost me $800 each bay 3 years ago. They are not cheap but good work/material and pretty quick. Since this is custom it will be slower and more expensive but really the only game in town as far as I know.
BTW, I bought the rear light units and the stainless steel covers off your coach when it was with the previous owner. I was told it would work on my coach but it won't and I won't be able to use them. Have you replaced yours? If not, I would offer them back if you're interested, otherwise I will eBay them.
Rob
91 Prevost LeMirage XL 40
Missouri
Bob, Interstate Metal Fabricators of Milwaukie Or 800-300-7270 they made the SS ribbed siding for Country Coach like on Don's Fairchilds coach and the trailers that match the Prevost if they are still in business
good luck
Rob-I'm -intrested in tail light assembly.Pm with price..Bob