BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: opus on November 08, 2010, 06:14:09 PM
I replaced this timer [thanks to Nick] with a newer model. My question is regarding the wiring of the old one. Wouldnt anyone know the proper way to wire it? I am thinking it was wired wrong. There are no online documents that I have found.
The way this was wired was the red/wht and black wire were all tied together to the hot wire. Then there was the yellow and the brown wire, by themselves. So there were 3 groups of wires going from the timer back to the unit.
Would this be correct?
Hi Opus,
I e-mailed you a PDF on all the webasto timers.
I couldn't post it to the board here for some reason?? >:(
Hope this helps
Nick-
Nick,
That wasnt quite what I needed. I needed something like this .pdf, but for the prior version, the square timer like I had.
http://www.techwebasto.com/heater_main/907111.pdf (http://www.techwebasto.com/heater_main/907111.pdf)