BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Greg Paciga (S.Ga) on November 06, 2010, 06:22:27 AM
Hey gang. Long time no post. But...where do I go when I have a problem?? You guessed it. Right here. I have two issues. One with the newly acquired mobile show room I bought for the business. A 94 Bluebird T2000 38 foot Ex school bus. I looked for onewith the storage bays for months and finally found one with the Cummins diesel engine I also wanted. A steal at $1,600 and only 130k miles. And the other problem with the MCI. I'll do a separate post for the MCI. But here's the problem I'm having with the Bluebird. I need to know how to bleed the air out of the heater coils. It seems this has to be done when the coolant is changed or the bus will continuously overheats. I've taken off the three access panels on the dash and find no valves. I looked for a manual on Ebay and the guy wanted $125.00. OUCH!!! So obviously (since I'm still the cheap @$# I always was) I need your help.
Again this a cummins 5.9 Diesel. Front mount. No heater coils in the back. All are in the front driver area.
Thanks Guys