Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: txjeff on September 17, 2010, 08:54:44 AM

Title: Wheel seals for a MC7 combo
Post by: txjeff on September 17, 2010, 08:54:44 AM
I have a 73 MC7 combo, Im told that the rear axles were from a scenicruser when Greyhound did the conversion. I have the books on the MC7 but it shows the original axle and tags. Im needing to replace a wheel seal on the tag and was looking for the part before I tore it down. Any clue of who might have any info on these conversions that Greyhound did?

Jeff
Title: Re: Wheel seals for a MC7 combo
Post by: lostagain on September 17, 2010, 09:46:40 AM
Take your old seal to the auto parts store, they're not hard to match.

JC
Title: Re: Wheel seals for a MC7 combo
Post by: txjeff on September 17, 2010, 10:07:23 AM
I have to do the work in someone elses shop on the weekend, I like to have the parts so I dont leave it down for several days. Where I am located unless its common or a Mack or International part it has to be ordered for the most part. I think Luke at US Coach can match the parts, I am just a typical Busnut and like save $$ where I can. ;D

Jeff
Title: Re: Wheel seals for a MC7 combo
Post by: kyle4501 on September 17, 2010, 12:42:19 PM
Join the Scenicruiser21 Yahoo group

http://finance.groups.yahoo.com/group/Scenicruiser21/ (http://finance.groups.yahoo.com/group/Scenicruiser21/)

go to the files tab (5th one down in the orange box on the left of the screen)
Scroll down & look for :
"Rear Axle" (~11th down)
&
"Wheels & Bearings" (~16th down)

I have added those sections from the parts manual as a pdf file.

I hope this helps.
Kyle
Text only | Text with Images