Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: ChuckMC8 on July 16, 2010, 03:59:57 AM

Title: What size are the nuts that secure DD3 Chamber?
Post by: ChuckMC8 on July 16, 2010, 03:59:57 AM
I'm trying to help with roadside assist- (7:00 am Friday 7/16/2010) 102C3-the nuts that hold one of the DD3 chambers to the bus are gone- anyone know what size and thread these are? IIRC, there are two nuts. Does a 15/16" wrench fit the nuts? It will help these guys get the hardware if I can specifically identify the size. they are 20 minutes from a hardware store- thanks, Chuck
Title: Re: What size are the nuts that secure DD3 Chamber?
Post by: Dreamscape on July 16, 2010, 04:04:50 AM
In a word, Yes. That's what was on mine.
Title: Re: What size are the nuts that secure DD3 Chamber?
Post by: JLL on July 16, 2010, 01:20:47 PM
I have an old dd3 can that I measured.  The studs look like 5/8 sae thread .
I hope that helps.
JLL
Title: Re: What size are the nuts that secure DD3 Chamber?
Post by: eagle19952 on July 16, 2010, 02:47:23 PM
I concur,15/16 x 5/8,SAE=fine thread=18 tpi.
DON'T FORGET THE LOCK WASHERS.
Text only | Text with Images