I have a rockwell with sensors for anti lock coming out of rear end...how do I know if they are good??(98 prevost salvage shell)rear end out now - would like to test before reinstalling..Bob
Bob, Prevost used 2 different systems can you tell us which you have they had the AD (splitting the dfifference) and the DCDL ( driver controlled) you really need the video Rockwell sells for 50 bucks 1-800-535-5560 comes in a set of 2 the AD is T87127V and the DCDL is T9007V the Az heat destroyed mine or I would send them to you
good luck
will do----- easy at this point to ck internal...not any hurry as there are plenty of other areas to work on. Thank you. Bob
Bob,
I have the ABS controller off my 2000 freightliner donor for my ISM repower. Is this of any value to you?
Brian
Brian I have complete system controller and all still in tack....have rear differential to go in coach with the abs sensor on each side of the carrier bearings. Just wanted to test before installation so I would not have to remove later.....The shell I purchased did not have a rear differential...oddly enough I did repurchase the one that came out of that bus..wires connectors are not fire damaged but just wanted to make sure they work...thanks for the offer..Bob
Quote from: robertglines1
The shell I purchased did not have a rear differential...oddly enough I did repurchase the one that came out of that bus..wires connectors are not fire damaged but just wanted to make sure they work...thanks for the offer..Bob
;)
Bob, disregard the info I gave you I thought you were asking about the anti /slip sorry I need to pay more attention
good luck
I know I have two related threads---sorry----all is good right on ohm---good to have positive outcome...I feel comfortable putting it back in..sitting on transmission jack ready...Bob