Print Page - 4106 fuel line problem

Title: 4106 fuel line problem
Post by: sweeney153 on May 21, 2010, 06:53:53 PM

I have a broken fuel line on my gm PD4106. Its one of the cross over lines between the heads. I got new lines but can't get the old one off. If I remove what I think is the fuel pump I will be able to get it. What I think is the fuel pump is between the two heads. A line comes from the primary filter and another goes to the secondary filter. I am obliviously not a diesel mechanic. If I remove this to gain access what problems will I have? Can I just take those few bolts out change the lines and put it back in?

(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.sweeney153.com%2Fimages%2FPhoto_052110_004.JPG&hash=55a6bf4c1e2d7c427ba8a9537edfd81b5677316c)

(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fwww.sweeney153.com%2Fimages%2FPhoto_052110_001.JPG&hash=6e3f80dff2a8dbc701c5196189166f9bd9c98315)

Title: Re: 4106 fuel line problem
Post by: sweeney153 on May 21, 2010, 06:55:02 PM

sorry for the giant pictures

Title: Re: 4106 fuel line problem
Post by: luvrbus on May 21, 2010, 07:01:16 PM

Remove the 3 bolts should be no problem just don't lose the fork.

good luck

Title: Re: 4106 fuel line problem
Post by: Just Dallas on May 21, 2010, 07:28:15 PM

Removed

Title: Re: 4106 fuel line problem
Post by: luvrbus on May 21, 2010, 07:45:09 PM

Dallas that bottom bolt is a bitch to get out on t drive are they harder on a v drive lol

good luck

Title: Re: 4106 fuel line problem
Post by: Just Dallas on May 21, 2010, 07:51:21 PM

Removed

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: sweeney153 on May 21, 2010, 06:53:53 PM