Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: mikke60 on May 15, 2010, 08:00:52 PM

Title: brake rebuild
Post by: mikke60 on May 15, 2010, 08:00:52 PM
Hi, Anybody out there know where I can get a rebuild kit for my brake application valve? I have 1968  Mci 5a.  Thanks   mike
Title: Re: brake rebuild
Post by: TomC on May 15, 2010, 11:23:48 PM
I would just buy a new one.  Good Luck, TomC
Title: Re: brake rebuild
Post by: mikke60 on May 16, 2010, 03:50:43 AM
I guess I could try to buy a new one ,but was trying to avoid a replumbing job. the unit I have now is obsolete. do you know if they sell dirrect replacement? thanks
Title: Re: brake rebuild
Post by: zubzub on May 16, 2010, 05:11:00 AM
There are a lot of brake valves out there, you'll probably find something close.  There is of course the option of pulling yours and seeing what's up before you throw it away....depends on timeframe.
Title: Re: brake rebuild
Post by: mikke60 on May 16, 2010, 08:34:41 AM
pulled it, opened it.  the 2 rubber seats in the inlet-exhaust valve show wear. this is causing a little blow by of air when brakes are not applied. Body looks to be in very good shape though. Would prefer to find rebuild kit, but a new  one may be the only option. 
Title: Re: brake rebuild
Post by: zubzub on May 16, 2010, 10:08:42 AM
Luke's the go to guy forrevuild stuff like that.  I would rebuild as well, I find it more satisfying....and educational.
Title: Re: brake rebuild
Post by: LUKE at US COACH on May 18, 2010, 08:16:11 AM
Hi Mikke 60 & Folks:

If your application valve is the original, it would be an E-1.  I have several out being rebuilt and should have them back in about a week.  You can reach us toll free at: 1-888-262-2434.

I Hope this HELPS!!!

Happy & SAFE!! Bussin' to All.

LUKE at US COACH
Text only | Text with Images