BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Mike in GA on April 28, 2010, 09:35:23 AM
I would like a reference on where to look for new or lightly used retractable lap belts for my MC 96a3.
They should have a center release button and 10 to 12 inch stiff 'sleeves' on each side coming up from the floor.
Took quite a ribbing at the recent rally for thinking the driver didn't need a set. My Flexsteel driver's seat didn't come so equipped.
Thanks iin advance.
Mike in GA
http://www.seatbeltsplus.com/ (http://www.seatbeltsplus.com/) See if this helps...Cable
Mike,
I found some for my Jeep awhile back on Ebay.
They were new takeout from conversion vans.
About 1/3 of new and were new.
Maybe harder to find now that the conversion market is slow........
Mike I also found ones that worked out pretty well for our coach on Ebay. I was looking for a certain color to go with everything else we have and teal green was a hard one to find but they were there! 20 bucks for two if I remember right!
I got mine from RV surplus. ;)
www.discountvantruck.com (http://www.discountvantruck.com) good outlet for seat belts used in conversions
good luck
What type of seat belts are required for passenger seating in a conversion. Are two point belts acceptable or do they have to be 3 point. I would assume that anchoring them to the original floor and/or side wall rails would be acceptable.
Ralph
We purchased our seat belts at The Surplus Center www.surpluscenter.com (http://www.surpluscenter.com) Because it is a surplus store, there inventory constantly changes, you have to check their website. Jack