BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: johnjem on March 28, 2010, 05:12:11 PM
Does any 1 have these part #s handy! I went to there web site and i it showed me was the 1st and 2 fuel filter????
Try pulling the air filter element out-it will usually have the part number stamped on the end rubber. Good Luck, TomC
I still have the original air filter with the oil<lol>i am trying to due away with that and go with a paper air filter.
I went that route 3 years ago and never found a replacement unit so still have the oil bath
I have been searching for you because I know there was an article somewhere on the net several years ago. I assume you have the four oil bath filters like on the 4106 (three on a 4104).
Someone did come up with a plan using the existing oil bath housing with some modification and paper filters. You just have to find the right size filter yourself using the oil bath as a guide.
Alternatively, you could replace the entire assembly like this guy has done:
http://autos.groups.yahoo.com/group/gmc-busnuts/files/air%20filter%20swap/ (http://autos.groups.yahoo.com/group/gmc-busnuts/files/air%20filter%20swap/)
Len