(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi427.photobucket.com%2Falbums%2Fpp351%2Fwrightwy%2FDSC05381.jpg&hash=eb36f7da800122263fdf0e03954bd68ef3024ae8)
Any thoughts on this fella's ?. Do I need to rebuild this pipe and make it a tade longer. It's on my 8v92
Will the clamp go on it and tighten?
Richard
Well Richard , The clamp will fit , However it won't pull it together. And Iam not sure if it has to seal tight or not . Iam told that you can not have any leaks in the exhuast or you lose boost ?
If it won't pull together, it needs to be longer. They do need to be tight.
Richard
Did you make the pipe yourself?
Richard
I'm sorry Andy, I didn't see the tear at the flange, take it to the welding shop.
Richard
Wrong flange on the tubing side Andy not deep enough every time I see your engine I am amazed that guy could take a top mount turbo turn it upside down and make it work like a front mount
good luck
I had a similar issue, the clamp would not pull it together. Another pipe fatigued and broke in two before I figured it out. I had to wrap Exhaust Tape on there to so the clamp could pull it together, Looks like that is what had been done to yours.
Something like this, I had to by a roll, If you were close by I would give you a piece of it.
http://www.speedwaymotors.com/DEI-Titanium-Exhaust-Wrap,27216.html (http://www.speedwaymotors.com/DEI-Titanium-Exhaust-Wrap,27216.html)