BCM Community

Pondering the possibilities and was wondering what the firestone and bridgestone rolling lobe air bag #s are for both the front and back.
Thanks as always.
p.s. this query relates to the possibility of using rolling lobe set up as my air beams decay.  So far I have only seen people (my bus as well) using block off plates and double convoluted.  It occurs to me that the rolling lobe bits are all over the place and maybe they could be changed in.....maybe less $$$ maybe smoother ride. 

Go to the mohawk industries website and check out their kits to get the part numbers you need. 
    Regards and happy bussin   mike

I tried that but as I don't have the original 4106 part #s it's a no go.  Basically the bag #s for a 4106, and the rolling lobe seat # for a 4106 front and rear. 

Removed

does this help

http://www.firestoneindustrial.com/pdfs/Aftermarket/BUS_014.pdf (http://www.firestoneindustrial.com/pdfs/Aftermarket/BUS_014.pdf)

http://www.truckspring.com/air-springs-bus_995.html (http://www.truckspring.com/air-springs-bus_995.html)

Thanks guys,  now I have a little figuring to do.

ZUB,

I can give you a Firestone # for the fronts: W01-358-5406

And a Goodyear # for the rears: 1R10-089 (OEM # G1019358)

Bob