Removed
hey dallas dont known what it would cost to ship but hear in costa rica there is a windshild factory
my new curved windshilds for my 57 crown cost $ 225 each. also many older windshilds can be cut
its tricky but can be done if you can find ones that are same curve but larger i can get more imfo
on this if you want john lone bus nut in costa rica
Removed
dallas sent me all imfo on your bus make model year and i will look in to it for you john
Dallas, if Crown can't help, you're on the right track with flat glass. ANY glass shop can cut flat glass to fit any opening you choose. Good luck!
Glenn
32 1/2 by 45 prevost(including curve)32 1/2 by 42 side with curve..89 xl
ck Curved Glass Windows a fellow from forum said he purchased from them..270 ea for side windows for prevo
Removed
when pre started the le mirage I thought they used gm windshields for the side glass...don't remember where I heard that...that was in early 70's or late 60's
Dallas, i think a 4101 set of glass will fit your bus. If it does HB industries was parting one out not long ago. i think the flat glass like our 3703 is the way to go. good luck.
Removed
dallas send me your bus imfo yr make model ect am going to winshild place this week john
Removed
ok dallas i went to windshild factory they dont have a mold for your bus but will make a mold & windshild for $ 300
but would need a old windshild to make a mold if left & right are the same 2 windshild would be about 1/2 price
plus crate and shipping let me known if i can help you john
Removed
ok dallas just a thought i was told once that crown bought there windshilds from gmc makes sence as most crowns used
the 4 piece flat glasss and crown used off the shelf truck parts patric over on the crown forun was selling a pair for $ 150
a while back and this week someone said they known where 25 pairs are i can check if this might help john