Don
We talked at BK'S rally last fall you told me what to set the valves and jake to but I can't remember. I was in the gold MCI with the 8v71 na would you be so kind to post the specks or pm to me
Thanks Rick 74MC-8
Rick, give Don a call he is busy trying to get Lin's bus on the road and Lisa is sick along with mother and mother in law and he may not have time for the board but will talk to you he wanted to talk to you anyway about the 8v92 we came up with some ideas for you.
I'll watch here if he doesn't have time I'll post the setting he uses for you.
good luck
Rick;
I thought that was you, set your valves at .014 Jake's .057 and due to the "A" timing set the injectors at 1.484, you can set them to 1.475 and you may get a little better fuel millage.
Hope that helps.
if you ever need to talk to me call I will get back to you asap. 888-473-3626 or 661-301-4648
Don
Rick, to add to Don a little check the Jake housing not very many around now but if it doesn't have 71-92A on top you might give him a call for a different setting.
good luck
Don,
What would the set up be for me on my 8v92T? I dont have my jakes yet (they are at a friends house in AZ) so it will be a while before I get them and have you put them on,
Thanks
John
Don
Thank You As they say (You DA man)
Luv I don't think I'm the one with any 92 info. I think if I was ever to re power I would look into a 4 stroke of some kind. But I hope that's not any time soon. First I need to get the inside done. I would like to have Cody do it but money to tight right now
To many Ricks here but the same applies to your Jake if they don't say 71-92A on the housing it takes a different setting
good luck
Thanks I will check them I do know I need at least one solenoid It has a broken wire
Rick 74MC-8
Cliff what do mine say on them??
John
Removed
John;
Give me the serial Number from your engine so I can have it looked up. Then I can tell you what to set every thing at.
Don