BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: roger dolan on December 02, 2009, 07:11:44 PM
Need positioner for winegard tv antenna finder. Model RD9999 they don't make them anymore. Hate to spend $1000 for whole system. Don't trust E bay on this type of thing. Any help would be apriceated.
Roger 4106
Roger,
By positioner do you mean the hand crank and plate that you use to manually slew the antenna?
John
A Picture would be nice...
Is it a Big Ball Type deal that the antenna attaches to?
I have a couple of those "spaceball" looking rigs in storage with
power supplies and controllers.
Dave....
If he talking about the box that reads the degrees that mounts on the wall and mounts to dish by wires I have a new one I bought several years ago and never used it
good luck
Luvrbus
Its a box about 2""hx 6'Wx 8''deep has buttons controls on the front. Has model # RD9999 on the front. The coax from antenna go into the box and then out to tv. There are a whole bunch of wires going out to the dish on top of the Bus. Made by Winegard.
Roger 4106