I find it hard to remember get under the bus with a camera when I am in the middle of a job, so i only have "after" pics. This is the spring brake install I did. The two relays...
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi392.photobucket.com%2Falbums%2Fpp3%2Fzubzub_photos%2FIMG_1942-1.jpg&hash=626b194041aa4c05c8bda754275c0a24f730568f)
....if I were to do it again I would get a relay that did both functions, cleaner install as it's a little tight in there.
springbrake can near the firewall.
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi392.photobucket.com%2Falbums%2Fpp3%2Fzubzub_photos%2FIMG_1947-1.jpg&hash=8a53c9fd707cab6da973c895dc1c4fbb3152ddd2)
There were maybe 2" to spare but....the captive bolts just make it in when the springs are pushing.
and finally a picture of part of the dreaded all aluminum suspension arm
(https://busconversionmagazine.com/forum/proxy.php?request=http%3A%2F%2Fi392.photobucket.com%2Falbums%2Fpp3%2Fzubzub_photos%2FIMG_1940.jpg&hash=62506457a90d506123966f272a36c2143682ae4f)