Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: robertglines1 on October 29, 2009, 09:45:52 AM

Title: 8v92 blower flex drive
Post by: robertglines1 on October 29, 2009, 09:45:52 AM
Just came from Detroit dealer ..They said my ufo is from the blower flex drive..does this make sense???ufo was in pan and was 1/2 snap ring along with a couple of very small metal parts flat 10thousands           thick by 3/8 square..they said 1800 dollars to fix and run rack?
Title: Re: 8v92 blower flex drive
Post by: robertglines1 on October 29, 2009, 11:51:17 AM
AFTER FURTHER RESEARCH I have discovered it is called a flex drive. do I have to pull the blower to replace.
Title: Re: 8v92 blower flex drive
Post by: luvrbus on October 29, 2009, 02:53:30 PM
no, pull the cover at the back of the engine it is the plate at the very top level with the blower , it could have a power steering pump or a belt drive in place of a cover.  It will have a shaft that turns the blower with splines remove the snap ring and pull the shaft out don't lose the spring, still bet it is a old keeper from a drive.The snap ring they are talking about holds the blower shaft in place


good luck
Text only | Text with Images