Print Page - Air to Air parts

Title: Air to Air parts
Post by: Flight102C3 on September 10, 2009, 08:02:04 PM

I need parts for my aftercooler. 90s, 45s, pipe of dif lenghts. I'm not sure where to look . THANKS 102

Title: Re: Air to Air parts
Post by: lostagain on September 11, 2009, 06:46:59 AM

I went to a muffler shop and got the aluminized steel pipe. They cut to length and expend one end to slide into the next. I welded the parts together at home. I used silicone hump hoses at the intercooler, turbo and blower intake. Make sure your welds are air tight.

JC

Title: Re: Air to Air parts
Post by: DaveG on September 11, 2009, 04:51:21 PM

Sure would be nice to roll a rib on each end where the hump hose attaches...be sure and use the spring loaded clamp.

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: Flight102C3 on September 10, 2009, 08:02:04 PM