BCM Community
Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: 3408cat on August 08, 2009, 09:29:17 AM
Does the drive shaft yoke nut tightness on the the transmission of a 4905 w/ standard trans establish bearing preload ??? I have a little - (1/16") up and down play on the yoke. The seal is not leaking. Could someone please tell me what the torque value of that nut is ??? Thanks, Bill.
End yoke nut 500-550 FT.-Lbs per 4905 M/M section 17 page 27.
jlv :P