Print Page - 8v92T hard to start?

Title: 8v92T hard to start?
Post by: johns4104s on July 27, 2009, 05:31:23 PM

After about 500 miles today we pulled for a few minutes, the off ramp was steep so was the ramp into the truck stop. after about 20 minutes I tried to re start the motor, it took three tries the last one was about 15 turns before it started. I normally run the motor a while at idle before I shut down could this be the reason?

Thanks

John

PS the

Title: Re: 8v92T hard to start?
Post by: gomer on July 27, 2009, 06:15:14 PM

John; I don't know all the perticulars but was it spinning fast [normal] or was it just slow? If it was slower than normal, you might have a simple connection problem. check all the terminals and ground straps.

Gomer

Title: Re: 8v92T hard to start?
Post by: johns4104s on July 28, 2009, 03:01:08 AM

Gomer,

It spins fast, it just does not want to start right away. Now from cold she fires on the first turn?

John

Title: Re: 8v92T hard to start?
Post by: Dreamscape on July 28, 2009, 04:01:29 AM

John, It just doesn't want to go to the desert! ;D

I'd check your ground, you might have a loose or corroded connection.

Be Safe,

Paul

Title: Re: 8v92T hard to start?
Post by: niles500 on July 28, 2009, 02:14:28 PM

*** It spins fast, it just does not want to start right away ***

You have a fuel delivery problem - FWIW

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: johns4104s on July 27, 2009, 05:31:23 PM