Text only | Text with Images

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: micgolub on June 25, 2009, 02:37:23 PM

Title: How do you remove the starter from 1986 IHV bus (9.0 Diesel)
Post by: micgolub on June 25, 2009, 02:37:23 PM
Hello,

I got this diesel school bus. It is a IHV and it won't start.

Getting to the starter is really difficult.

But I can do it. I can remove the bottom two bolts. They are 3/4" hex heads.

However I don't know how to get to the top bolt.

I tried the obstruction "half-moon" wrench but it didn't work....

any ideas? Are there other bolts to remove? I see some 3/4" bolts attached to the frame, but not sure if those will help?

I doubt if the service manual will tell me anything more?

I've been trying to get this done for awhile now. I don't think I can afford a tow, and/or repair by a shop.

Mike
Fairbanks, Alaska
Title: Re: How do you remove the starter from 1986 IHV bus (9.0 Diesel)
Post by: TomCat on June 25, 2009, 03:47:25 PM
Hey Mike....is there any way you can post pics of your situation?

Some of the forum member can be very creative with the proper visual input.   ;D

HTH

Jay
87 SaftLiner
Title: Re: How do you remove the starter from 1986 IHV bus (9.0 Diesel)
Post by: bobofthenorth on June 25, 2009, 08:33:36 PM
If you can get at the end of the starter then several extensions strung together on a socket might work.  A couple of extensions put together is usually better than a single long extension because they will flex more and let you get into harder to get at spots.
Text only | Text with Images