Print Page - 8v92TA oil pan drain.

Title: 8v92TA oil pan drain.
Post by: johns4104s on June 20, 2009, 11:07:31 AM

There are two plugs, a small one in the bottom and a large one 1" up the side of the pan. i used the small bottom plug that srews into a brackrt. Is this correct?

Thanks

John

Title: Re: 8v92TA oil pan drain.
Post by: luvrbus on June 20, 2009, 11:15:47 AM

John, the 3/4 in the bottom of the pan is to drain the 1 inch on the side is for a oil heater good luck

Title: Re: 8v92TA oil pan drain.
Post by: JackConrad on June 20, 2009, 01:03:34 PM

Yes, you are correct. We removed the plug in the side to install our oil temperature gauge sending unit. Jack

Title: Re: 8v92TA oil pan drain.
Post by: johns4104s on June 20, 2009, 06:03:06 PM

Thanks Guys

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: johns4104s on June 20, 2009, 11:07:31 AM