Print Page - DDEC Fuse

Title: DDEC Fuse
Post by: homermandy on July 07, 2006, 06:27:44 PM

I was checking my fuse from the battery to the DDEC and ATEC. It looked pretty rusty. I went to take off the screws at the fuse and it literally crushed in my hand. Now, what size fuse was it:)? Amperage wise. I need to get one in the morning. Any special kind? I assume a normal fuse will work. Thanks

PS. This also may be my intermittant trans do not shift issue. Will keep you posted.

Title: Re: DDEC Fuse
Post by: homermandy on July 07, 2006, 06:34:22 PM

I checked online at some schematics and it looks like it might be a 15A fuse?

Title: Re: DDEC Fuse
Post by: RTS/Daytona on July 07, 2006, 06:45:39 PM

ECM Power connector pins F/E (circuit 240) to one 20 amp fuse
ECM Power Connector pins A/B (circuit 241) to one 20 amp fuse

Pete RTS/Daytona

Title: Re: DDEC Fuse
Post by: homermandy on July 07, 2006, 07:33:33 PM

Thanks Pete. Interesting, it looks like 2 wires were connected to a single 20A fuse then. Unless I am missing a feed from the batteries. Thanks

BCM Community

Bus Discussion => Bus Topics ( click here for quick start! ) => Topic started by: homermandy on July 07, 2006, 06:27:44 PM