I need a lighting schematic and electrical stud list for the rear junction box for a 1972 MC7. If someone has this, can you please scan them and email them to me?
Thanks
Craig
Thanks to all who responded both on the board and off. I have received the files I need.
craig
If nobody has the info, try calling MCI tech support. 1800 241 2947 Most everybody there is very helpful. I am sure that they can fax you the info.
God bless,
John
Hi Craig:
I have the info you need @ home, but we are 800 miles away at the moment.
If you still need it next week, I will send it to you
Best regards.
Mark
Thanks Mark. I'll let you know.
I received a wire stud list for the RJB tonight. I'm going to look it over an compare to the MC9 list. I think that may be all I need.
I'm trying to determine if the wiring is the same as the MC8 and 9 for connecting my toad converters. A fellow nut in Canada is interested
in one. I know the converters have been installed in an MC7 but I'm not sure if the studs are the same as what I put in the instruction for the
MC8 and 9.
craig
Thanks to those who have responded both on the board and via email. I have received the files I need.
craig
Craig,
I bet its more like the MC-5.
Fred
Quote from: Fredward on May 21, 2009, 05:30:26 PM
Craig,
I bet its more like the MC-5.
Fred
Actually, the studs I am interested in for the tail lights are identical to the MC8 and 9. I think there was a difference in them on you 5, but can't remember for sure. I should get them again from you so I can add the MC5 to my instructions for the toad converter.
I'll bring the book along tomorrow when I come up.